Instructions for Use:

1. Input Connection:

   • Connect the input voltage (VIN) to the input pin of the LN8097BH.
   • Ensure the input voltage is within the specified range (2.5 V to 5.5 V).

2. Output Connection:

   • Connect the output pin (VOUT) to the load.
   • The LN8097BH provides a fixed output voltage of 1.2 V.

3. Ground Connection:

   • Connect the ground (GND) pin to the common ground of the circuit.

4. Capacitors:

   • Place a 1 μF ceramic capacitor between the input pin and ground to filter out noise.
   • Place a 1 μF ceramic capacitor between the output pin and ground to stabilize the output voltage.

5. Thermal Considerations:

   • Ensure adequate heat dissipation if operating at high output currents or in high ambient temperatures.
   • The device has built-in thermal shutdown protection to prevent damage from overheating.

6. Load Regulation:

   • The load regulation is typically 0.2% from 10 mA to 300 mA, ensuring stable output voltage under varying load conditions.

7. Line Regulation:

   • The line regulation is typically 0.1% per volt, maintaining output stability over the input voltage range.

8. Operating and Storage Temperature:

   • The device can operate within a temperature range of -40°C to 85°C.
   • Store the device in an environment with a temperature range of -40°C to 150°C.

9. Thermal Shutdown:

   • The device will enter thermal shutdown mode when the junction temperature reaches approximately 160°C to protect against overheating.

10. Handling Precautions:

    • Handle the device with care to avoid static discharge, which can damage the internal components.
    • Follow standard ESD (Electrostatic Discharge) precautions when handling and soldering the device.