Share:
Specifications
SKU: 42408
ACB 3C 3#16S PIN PLUG
| Parameter | Description | Value |
|---|---|---|
| Part Number | Part number of the device | MA704A |
| Type | Type of device | Hall Effect Sensor |
| Operating Voltage | Supply voltage range | 3.0V to 5.5V |
| Output Type | Output signal type | Digital (Open-Drain) |
| Sensitivity | Magnetic field sensitivity | 25 Gauss |
| Response Time | Time taken to respond to a magnetic field change | 1 ms |
| Quiescent Current | Current consumption when no magnetic field is detected | 10 μA |
| Operating Temperature | Temperature range for normal operation | -40°C to 85°C |
| Storage Temperature | Temperature range for storage | -65°C to 150°C |
| Package | Physical package type | SOT-23 |
| Polarity | Magnetic polarity detection | Bipolar |
| Mounting | Mounting orientation | Surface Mount |
Instructions for Use:
Power Supply:
- Connect the Vcc pin to a supply voltage between 3.0V and 5.5V.
- Connect the GND pin to the ground.
Output Connection:
- The output pin (OUT) is an open-drain configuration. Connect it to a pull-up resistor (typically 10kΩ) between the output and Vcc.
- When a magnetic field exceeding the sensitivity threshold is detected, the output will be pulled low (0V).
Magnetic Field Sensitivity:
- The sensor detects magnetic fields with a sensitivity of 25 Gauss. Ensure that the magnetic field strength is within this range for reliable operation.
Temperature Considerations:
- Operate the sensor within the temperature range of -40°C to 85°C for optimal performance.
- Store the sensor in a temperature range of -65°C to 150°C.
Mounting:
- Mount the sensor on a PCB using surface mount technology (SMT).
- Ensure proper soldering to avoid mechanical stress and ensure electrical connections.
Handling:
- Handle the sensor with care to avoid damage from static electricity or physical stress.
- Follow standard ESD (Electrostatic Discharge) precautions during handling and assembly.
Inquiry - MA704A
