Share:
Specifications
SKU: 107064
Expandable 4-Wide 2-Input And-Or-Inverter Gate2
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | VDD | - | 3 | - | 15 | V |
| Input Voltage | VI | - | 0 | - | VDD | V |
| Output Voltage (High) | VOH | IO = -1mA | - | 2.4 | VDD - 0.5 | V |
| Output Voltage (Low) | VOL | IO = 1mA | 0 | 0.4 | 0.5 | V |
| Input Current (High) | IIH | VI = VDD - 1.5V | - | 1 | 20 | μA |
| Input Current (Low) | IIL | VI = 0.5V | -20 | -1 | - | μA |
| Propagation Delay Time | tpd | VDD = 10V, fin = 1kHz | - | 30 | 100 | ns |
| Power Dissipation | PD | - | - | - | 100 | mW |
| Operating Temperature | TA | - | -40 | - | 85 | °C |
| Storage Temperature | TSTG | - | -65 | - | 150 | °C |
Instructions for Using CD4086BE
Supply Voltage:
- Ensure the supply voltage (VDD) is between 3V and 15V.
- Connect the positive supply to pin 14 and the ground (GND) to pin 7.
Input Connections:
- Connect input signals to the appropriate input pins (1, 2, 5, 6, 8, 9, 12, 13).
- Ensure input voltages are within the range of 0V to VDD.
Output Connections:
- Connect output pins (3, 4, 10, 11) to the load or next stage of the circuit.
- Ensure the output current does not exceed the specified limits to avoid damage.
Propagation Delay:
- The propagation delay time (tpd) is typically around 30ns at 10V supply voltage.
- This delay should be considered when designing high-speed circuits.
Temperature Considerations:
- The operating temperature range is from -40°C to 85°C.
- The storage temperature range is from -65°C to 150°C.
Power Dissipation:
- The maximum power dissipation is 100mW.
- Ensure proper heat dissipation if the device is expected to operate near this limit.
Handling Precautions:
- Handle the IC with care to avoid static discharge, which can damage the internal components.
- Use appropriate ESD protection measures during handling and installation.
Testing:
- Test the IC under the recommended conditions to ensure it meets the specified performance parameters.
- Verify the functionality of each gate by applying known input signals and measuring the corresponding outputs.
Inquiry - CD4086BE
