Share:
Specifications
SKU: 133890
3-13V Single Hot-Swap IC w/ Power Good Report, Act-High Enable 14-SOIC -40 to 85
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | - | 3.0 | - | 18.0 | V |
| Input High Voltage | VIH | II = -0.1 mA | 2.0 | - | VCC | V |
| Input Low Voltage | VIL | II = 1.0 mA | 0.0 | - | 0.8 | V |
| Output High Voltage | VOH | IO = -0.4 mA, VCC = 15V | 12.0 | - | - | V |
| Output Low Voltage | VOL | IO = 16 mA, VCC = 15V | 0.0 | - | 0.5 | V |
| Input Leakage Current | IIL | VI = 0V to VCC | -1.0 | - | 1.0 | μA |
| Output Leakage Current | IOL | VO = 0V | -1.0 | - | 1.0 | μA |
| Propagation Delay Time | tpd | VCC = 5V, VOH = 3.5V, VOL = 1.5V | - | 35 | - | ns |
| Power Dissipation | PD | - | - | - | 100 | mW |
Instructions for Use:
- Supply Voltage: The MC14050BAL operates within a supply voltage range of 3.0V to 18.0V. Ensure that the supply voltage is within this range to avoid damage to the device.
- Input Levels:
- High Level (VIH): The input is considered high when the voltage is between 2.0V and the supply voltage (VCC).
- Low Level (VIL): The input is considered low when the voltage is between 0.0V and 0.8V.
- Output Levels:
- High Level (VOH): The output is considered high when the voltage is at least 12.0V (for VCC = 15V) with a sink current of -0.4 mA.
- Low Level (VOL): The output is considered low when the voltage is at most 0.5V (for VCC = 15V) with a source current of 16 mA.
- Leakage Currents:
- Input Leakage (IIL): The maximum input leakage current is ±1.0 μA.
- Output Leakage (IOL): The maximum output leakage current is ±1.0 μA.
- Propagation Delay (tpd): The typical propagation delay time is 35 ns at a supply voltage of 5V.
- Power Dissipation: The maximum power dissipation is 100 mW. Ensure that the device is not operated beyond this limit to prevent overheating and potential damage.
Additional Notes:
- Always ensure proper decoupling capacitors are used near the power supply pins to minimize noise and ensure stable operation.
- Refer to the datasheet for detailed pin configurations and additional specifications.
Inquiry - MC14050BAL
