Share:
Specifications
SKU: 135747
Hex Inverter Schmitt Trigger
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 2.0 | - | 5.5 | V | - |
| Input Low Voltage | VIL | 0.8 | - | - | V | VCC = 5.5V |
| Input High Voltage | VIH | - | - | 3.5 | V | VCC = 5.5V |
| Output Low Voltage | VOL | 0.4 | - | - | V | IOL = 16mA, VCC = 5.5V |
| Output High Voltage | VOH | - | - | 4.5 | V | IOH = -4mA, VCC = 5.5V |
| Propagation Delay Time (Low to High) | tPLH | - | 6.5 | - | ns | VCC = 5.5V, VOH = 3.5V, VOL = 1.5V, CL = 15pF |
| Propagation Delay Time (High to Low) | tPHL | - | 6.5 | - | ns | VCC = 5.5V, VOH = 3.5V, VOL = 1.5V, CL = 15pF |
| Power Dissipation | PD | - | - | 330 | mW | Per Package |
| Operating Temperature Range | TA | -40 | - | 125 | °C | - |
| Storage Temperature Range | TSTG | -65 | - | 150 | °C | - |
Instructions for Use:
Power Supply:
- Ensure the supply voltage (VCC) is within the range of 2.0V to 5.5V.
- Connect the ground (GND) pin to the system ground.
Input Signals:
- Input signals should be within the specified input voltage levels (VIL and VIH).
- Avoid applying voltages outside the VCC range to the inputs.
Output Signals:
- The output high (VOH) and output low (VOL) voltages are dependent on the load current and supply voltage.
- Ensure the load does not exceed the maximum output current ratings.
Propagation Delay:
- The propagation delay times (tPLH and tPHL) are critical for timing considerations in your circuit design.
- These values are measured under specific conditions; adjust for different conditions as needed.
Thermal Management:
- The device can dissipate up to 330mW per package. Ensure adequate heat dissipation to avoid overheating.
- Operate the device within the specified temperature ranges (TA and TSTG).
Storage and Handling:
- Store the device in a dry, cool environment within the storage temperature range.
- Handle with care to avoid static discharge and physical damage.
Schematic and Layout:
- Follow recommended PCB layout guidelines to minimize noise and ensure reliable operation.
- Use decoupling capacitors close to the power pins to filter out noise.
Data Sheet:
- Refer to the full data sheet for detailed specifications and additional information.
Inquiry - MC74ACT14DR2
