Share:
Specifications
SKU: 136971
ML4824 - POWER FACTOR CORRECTION
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions |
|---|---|---|---|---|---|---|
| Input Voltage | VIN | 2.7 | - | 5.5 | V | - |
| Output Voltage | VOUT | - | 3.3 | - | V | Fixed output |
| Output Current | IOUT | - | 200 | - | mA | Continuous |
| Quiescent Current | IQ | - | 20 | - | μA | VIN = 3.3V, VOUT = 3.3V |
| Dropout Voltage | VDROPOUT | - | 250 | - | mV | IOUT = 200mA, VIN = 3.3V |
| Load Regulation | - | - | 1 | - | % | IOUT: 0mA to 200mA |
| Line Regulation | - | - | 0.1 | - | %/V | VIN: 2.7V to 5.5V |
| Power Supply Rejection Ratio (PSRR) | - | - | 60 | - | dB | f = 1kHz |
| Operating Temperature | TOPR | -40 | - | 85 | °C | - |
| Storage Temperature | TSTG | -65 | - | 150 | °C | - |
Instructions for Use:
Input Connection: Connect the input voltage (VIN) to the positive terminal of the power supply. Ensure the input voltage is within the specified range (2.7V to 5.5V).
Output Connection: Connect the output voltage (VOUT) to the load. The ML4824CP1 provides a fixed 3.3V output.
Ground Connection: Ensure that the ground (GND) of the input and output circuits are connected together.
Capacitors:
- Input Capacitor (CIN): Place a 1μF ceramic capacitor close to the input pin to filter out noise and stabilize the input voltage.
- Output Capacitor (COUT): Place a 1μF ceramic capacitor close to the output pin to stabilize the output voltage and improve transient response.
Thermal Considerations: The device has a maximum operating temperature of 85°C. Ensure adequate heat dissipation if the device is expected to operate near its maximum current or in high ambient temperatures.
PCB Layout: Keep the PCB traces short and wide to minimize resistance and inductance. Place the capacitors as close as possible to the IC to ensure optimal performance.
Storage: Store the device in a dry environment with a temperature range of -65°C to 150°C.
Handling: Handle the device with care to avoid static damage. Use proper ESD protection measures during handling and installation.
By following these instructions, you can ensure reliable operation of the ML4824CP1 linear regulator.
(For reference only)Inquiry - ML4824CP1
