Instructions for Use:

1. Power Supply:

   • The OP15GJ can operate with a supply voltage ranging from 2.7V to 5.5V.
   • Ensure the power supply is stable and within the specified range to avoid damage.

2. Quiescent Current:

   • The quiescent current is typically 80 μA when no load is connected and the supply voltage is 5V.
   • This value helps in power budgeting for low-power applications.

3. Input Offset Voltage:

   • The input offset voltage is typically 10 μV and can vary up to 50 μV at 5V supply.
   • This parameter is crucial for precision applications where small signal levels are involved.

4. Input Bias Current:

   • The input bias current is typically 20 nA and can go up to 50 nA at 5V supply.
   • High input impedance sources should be used to minimize errors due to input bias current.

5. Slew Rate:

   • The slew rate is typically 0.3 V/μs at 5V supply.
   • This parameter limits the maximum rate of change of the output voltage and is important for high-frequency applications.

6. Bandwidth:

   • The bandwidth is typically 1.1 MHz at a gain of 1 and a supply voltage of 5V.
   • Higher gains will reduce the bandwidth.

7. Output Voltage Swing:

   • The output voltage swing ranges from 0.1V to 4.9V when the supply voltage is 5V and the load resistance is 10kΩ.
   • Ensure that the output does not exceed these limits to prevent distortion or damage.

8. Mounting and Handling:

   • Handle the OP15GJ with care to avoid static damage.
   • Follow proper soldering techniques to ensure reliable connections.

9. Stability:

   • The OP15GJ is unity-gain stable and can be used in a wide range of applications without additional compensation.

10. Storage:

    • Store the OP15GJ in a dry, cool place to prevent moisture-related issues.