Share:
Specifications
SKU: 150524
Configuration EPROM
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 4.5 | 5.0 | 5.5 | V | Operating supply voltage |
| Standby Current | ISB | - | 1 | 2 | μA | Current consumption in standby mode |
| Operating Current | IOP | 5 | 10 | 20 | mA | Current consumption during operation |
| Output Voltage (High) | VOH | 4.0 | 4.5 | 5.0 | V | Output voltage when high |
| Output Voltage (Low) | VOL | 0.0 | 0.5 | 0.8 | V | Output voltage when low |
| Output Current (Sink) | IOS | 10 | 20 | 30 | mA | Maximum current that can be sunk by output |
| Output Current (Source) | IOSR | 10 | 20 | 30 | mA | Maximum current that can be sourced by output |
| Input Voltage (High) | VIH | 3.0 | 3.5 | 5.0 | V | Minimum input voltage for logic high |
| Input Voltage (Low) | VIL | 0.0 | 0.8 | 1.5 | V | Maximum input voltage for logic low |
| Propagation Delay Time | tpd | 5 | 10 | 15 | ns | Time delay from input to output |
| Power-down Time | tpdw | 100 | 200 | 300 | ns | Time to enter power-down mode |
| Wake-up Time | twup | 100 | 200 | 300 | ns | Time to exit power-down mode |
| Operating Temperature | Toper | -40 | - | 85 | °C | Temperature range for normal operation |
| Storage Temperature | Tstg | -65 | - | 150 | °C | Temperature range for storage |
Instructions for Using XC1765DPC
Power Supply:
- Ensure the supply voltage (VCC) is within the specified range of 4.5V to 5.5V.
- Use a stable power source to avoid fluctuations that could affect performance.
Current Consumption:
- In standby mode, the device consumes between 1μA and 2μA.
- During operation, the current consumption is typically around 10mA but can range from 5mA to 20mA.
Output Voltage:
- When the output is high, the voltage should be between 4.0V and 5.0V.
- When the output is low, the voltage should be between 0.0V and 0.8V.
Input Voltage:
- For a logic high input, the voltage should be at least 3.0V and can go up to 5.0V.
- For a logic low input, the voltage should be no more than 1.5V and can be as low as 0.0V.
Propagation Delay:
- The time delay from input to output (tpd) is typically 10ns but can range from 5ns to 15ns.
Power Management:
- To enter power-down mode, use the appropriate control signal. The transition time (tpdw) is typically 200ns but can range from 100ns to 300ns.
- To exit power-down mode, use the wake-up signal. The transition time (twup) is typically 200ns but can range from 100ns to 300ns.
Temperature Considerations:
- The operating temperature range is from -40°C to 85°C.
- The storage temperature range is from -65°C to 150°C.
Handling and Storage:
- Handle the device with care to avoid static damage.
- Store the device in a dry environment within the specified storage temperature range.
Mounting and Soldering:
- Follow recommended soldering profiles to ensure reliable connections.
- Avoid excessive heat during soldering to prevent damage to the device.
Testing and Verification:
- After mounting, verify the supply voltage and output voltages to ensure proper operation.
- Test the propagation delay and other timing parameters to confirm they meet the specifications.
Inquiry - XC1765DPC
