Share:
Specifications
SKU: 156273
AC Solid State Relay
| Parameter | Description | Value |
|---|---|---|
| Part Number | JC201DN | - |
| Type | JFET (Junction Field-Effect Transistor) | - |
| Polarity | N-Channel | - |
| Vds (Max) | Drain-to-Source Voltage | 200 V |
| Vgs (Max) | Gate-to-Source Voltage | ±20 V |
| Ids (Max) | Drain Current | 500 mA |
| Pd (Max) | Power Dissipation | 1 W |
| fT (Typ) | Transition Frequency | 8 MHz |
| Rds(on) (Max) | On-State Resistance (at Vgs = 0 V) | 20 Ω |
| Input Capacitance (Ciss) | Input Capacitance (at Vds = 20 V, f = 1 MHz) | 10 pF |
| Output Capacitance (Coss) | Output Capacitance (at Vds = 20 V, f = 1 MHz) | 3 pF |
| Reverse Transfer Capacitance (Crss) | Reverse Transfer Capacitance (at Vds = 20 V, f = 1 MHz) | 2 pF |
| Storage Temperature Range | Operating Temperature Range | -65°C to +150°C |
| Operating Temperature Range | Storage Temperature Range | -65°C to +150°C |
Instructions for Use:
Handling Precautions:
- Handle the JC201DN with care to avoid static discharge, which can damage the device.
- Use proper ESD (Electrostatic Discharge) protection equipment when handling the component.
Mounting:
- Ensure that the PCB (Printed Circuit Board) is clean and free from contaminants.
- Solder the JC201DN using a temperature-controlled soldering iron set to a maximum of 300°C.
- Avoid applying excessive heat or mechanical stress during soldering.
Biasing:
- Apply the gate-to-source voltage (Vgs) within the specified range to control the drain current (Ids).
- Ensure that the drain-to-source voltage (Vds) does not exceed the maximum rating to prevent breakdown.
Power Dissipation:
- If operating at high power levels, ensure adequate heat sinking to maintain the junction temperature within safe limits.
- Calculate the power dissipation (Pd) as the product of the drain current (Ids) and the drain-to-source voltage (Vds).
Storage:
- Store the JC201DN in a dry, cool place away from direct sunlight and sources of heat.
- Keep the components in their original packaging until ready for use to protect against moisture and static damage.
Testing:
- Use a multimeter or a dedicated transistor tester to verify the functionality of the JC201DN before installation.
- Check for continuity between the pins and ensure that the device meets the specified electrical parameters.
Inquiry - JC201DN
