Share:
Specifications
SKU: 234260
B-Suffix Series CMOS Gates
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | Operating | 3.0 | - | 18 | V |
| Input Voltage | VI | Operating | -0.5 | - | VCC + 0.5 | V |
| Output Voltage (High) | VOH | IO = -1.6 mA, VCC = 5V | - | 3.5 | 5.0 | V |
| Output Voltage (Low) | VOL | IO = 16 mA, VCC = 5V | 0 | 0.4 | - | V |
| Input Current | II | VI = 0V to VCC | -1 | 0 | 1 | μA |
| Output Current (Sink) | IOS | VOL = 0.4V, VCC = 5V | - | 16 | - | mA |
| Output Current (Source) | IOS | VOH = 3.5V, VCC = 5V | - | -1.6 | - | mA |
| Propagation Delay Time | tpd | VCC = 5V, VI = 2.5V | - | 20 | - | ns |
| Power Dissipation | PD | Maximum | - | - | 200 | mW |
Instructions for Using the MC14072BCL:
Power Supply:
- Ensure the supply voltage (VCC) is within the operating range of 3.0V to 18V.
- Connect the ground (GND) pin to a stable ground reference.
Input Handling:
- The input voltage (VI) should not exceed VCC + 0.5V or fall below -0.5V.
- Input current should be kept within the specified limits to avoid damage to the device.
Output Configuration:
- For high output (VOH), ensure the load current does not exceed the maximum sink current (IOS).
- For low output (VOL), ensure the load current does not exceed the maximum source current (IOS).
Propagation Delay:
- The propagation delay time (tpd) is crucial for timing considerations in digital circuits. Ensure that the delay is within acceptable limits for your application.
Thermal Management:
- The maximum power dissipation (PD) should not exceed 200 mW to prevent overheating and potential damage to the device.
- Consider using a heat sink or other cooling methods if operating near the maximum power dissipation.
Storage and Handling:
- Store the device in a dry, static-free environment.
- Handle with care to avoid electrostatic discharge (ESD) damage.
Schematic and Layout:
- Follow recommended PCB layout guidelines to minimize noise and ensure reliable operation.
- Use decoupling capacitors close to the power pins to filter out any supply noise.
By adhering to these parameters and instructions, you can ensure the reliable and efficient operation of the MC14072BCL in your circuit design.
(For reference only)Inquiry - MC14072BCL
