Below is the parameter table and instructions for the SKN130/12 electronic component:

Parameter Table

Instructions

1. Handling and Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Handle with care to avoid mechanical damage.

2. Mounting:

   • Ensure proper heat dissipation by using a heatsink if necessary.
   • Use appropriate soldering techniques to avoid thermal shock. Soldering temperature should not exceed 260°C for more than 10 seconds.

3. Electrical Connections:

   • Connect the device according to the polarity markings on the package.
   • Use suitable wire gauges to handle the current ratings.

4. Operating Conditions:

   • Do not exceed the maximum ratings listed in the parameter table.
   • Operate within the specified temperature range to ensure reliable performance.

5. Testing:

   • Use a multimeter or appropriate testing equipment to verify the forward voltage and reverse breakdown voltage.
   • Ensure that the device is properly grounded during testing to avoid electrical hazards.

6. Disposal:

   • Dispose of the device in accordance with local environmental regulations.

If you have any specific questions or need further details, feel free to ask!