Instructions for Use

1. Input Connection:

   • Connect the input voltage (VIN) to the designated input terminals.
   • Ensure the input voltage is within the specified range (8V to 36V).

2. Output Connection:

   • Connect the load to the output terminals (VOUT).
   • The output voltage is fixed at 12V and can supply up to 20A.

3. Mounting:

   • Mount the module on a heatsink or a well-ventilated area to ensure proper heat dissipation.
   • Use thermal paste between the module and the heatsink for better thermal conductivity.

4. Protection Features:

   • Over Voltage Protection (OVP): Protects against output voltages exceeding safe levels.
   • Under Voltage Protection (UVP): Ensures the module does not operate below the minimum input voltage.
   • Short Circuit Protection (SCP): Protects against short circuits at the output.
   • Over Temperature Protection (OTP): Shuts down the module if the temperature exceeds safe limits.

5. Operating Environment:

   • Ensure the operating temperature is within -40°C to 85°C.
   • Store the module in an environment with temperatures ranging from -40°C to 125°C.

6. Testing:

   • Before connecting the load, verify the output voltage using a multimeter.
   • Gradually increase the load to the rated current to ensure stable operation.

7. Maintenance:

   • Regularly inspect the module for signs of wear or damage.
   • Clean the heatsink periodically to maintain optimal cooling performance.