Share:
Specifications
SKU: 280202
Catalog Scans - Shortform Datasheet
| Parameter | Description | Value |
|---|---|---|
| Part Number | Full part number | MG100H2CL1 |
| Type | Device type | MOSFET |
| Technology | Technology used | Si |
| Package | Package type | TO-220 |
| VDS (Max) | Maximum Drain-Source Voltage | 100 V |
| VGS (Max) | Maximum Gate-Source Voltage | ±20 V |
| ID (Max) | Maximum Drain Current | 10 A |
| RDS(on) | On-State Resistance at VGS = 10 V | 2.5 mΩ |
| PTOT (Max) | Total Power Dissipation (at TA = 25°C) | 150 W |
| fSW (Max) | Maximum Switching Frequency | 500 kHz |
| QG | Gate Charge | 50 nC |
| QGD | Gate-Drain Charge | 15 nC |
| QGS | Gate-Source Charge | 35 nC |
| td(on) | Turn-On Delay Time | 20 ns |
| tr | Rise Time | 25 ns |
| td(off) | Turn-Off Delay Time | 30 ns |
| tf | Fall Time | 40 ns |
| Operating Temperature | Operating Junction Temperature Range | -55°C to +175°C |
| Storage Temperature | Storage Temperature Range | -65°C to +150°C |
| Mounting Type | Mounting method | Through-Hole |
Instructions for Use
Handling and Storage:
- Store the device in a dry, cool place.
- Handle with care to avoid damage to the leads and package.
- Use appropriate ESD protection when handling the device.
Mounting:
- Ensure the mounting surface is clean and flat.
- Apply thermal paste between the device and heatsink for optimal heat dissipation.
- Tighten the mounting screws to the recommended torque value to avoid mechanical stress.
Electrical Connections:
- Connect the drain, source, and gate terminals as per the circuit diagram.
- Use short and thick wires to minimize inductance and resistance.
- Ensure proper insulation to prevent short circuits.
Thermal Management:
- Use a heatsink or cooling solution to keep the junction temperature within the specified range.
- Monitor the temperature during operation to ensure it does not exceed the maximum operating temperature.
Testing:
- Test the device in a controlled environment to verify its performance.
- Use a multimeter to check for continuity and resistance values.
- Perform functional tests to ensure the device meets the required specifications.
Safety Precautions:
- Do not exceed the maximum ratings for voltage, current, and power dissipation.
- Use appropriate fuses and protective devices in the circuit to prevent damage.
- Follow all relevant safety standards and guidelines.
Inquiry - MG100H2CL1
