Share:
Specifications
SKU: 280993
HIGH POWER SWITCHING USE INSULATED TYPE
| Parameter | Description | Value |
|---|---|---|
| Part Number | Full part number | QM300HA-24 |
| Type | Component type | Inductor |
| Frequency Range | Operating frequency range | 100 kHz to 5 MHz |
| Inductance | Nominal inductance value | 24 μH |
| Tolerance | Inductance tolerance | ±10% |
| DC Resistance | Maximum DC resistance | 0.08 Ω |
| Saturation Current | Current at which inductance drops by 10% | 3.5 A |
| Temperature Range | Operating temperature range | -40°C to +125°C |
| Package Type | Physical package type | SMD (Surface Mount) |
| Dimensions | Length x Width x Height | 6.0 x 6.0 x 3.0 mm |
| Weight | Weight of the component | 0.3 g |
| Mounting | Mounting method | Surface mount |
| RoHS Compliance | RoHS compliance | Yes |
Instructions for Use:
Handling:
- Handle with care to avoid mechanical damage.
- Avoid exposure to extreme temperatures or humidity during storage.
Soldering:
- Use a soldering iron with a temperature not exceeding 300°C.
- Soldering time should not exceed 5 seconds per terminal.
- Allow the component to cool naturally after soldering.
Mounting:
- Ensure the PCB is clean and free from contaminants.
- Place the component on the PCB and align it properly before soldering.
- Use a flux-compatible solder for optimal bonding.
Testing:
- After mounting, test the inductance using an LCR meter to ensure it meets the specified tolerance.
- Check for any shorts or opens in the circuit.
Storage:
- Store in a dry, cool place away from direct sunlight.
- Keep in original packaging until ready for use to prevent static damage.
Disposal:
- Dispose of the component according to local environmental regulations.
- Recycle if possible.
Inquiry - QM300HA-24
