Instructions for Use:

1. Mounting:

   • Ensure the diode is mounted on a heat sink if operating near maximum current to prevent overheating.
   • Use thermal paste between the diode and heat sink for better thermal conductivity.

2. Polarity:

   • Always observe the correct polarity when installing the diode. The cathode (positive) and anode (negative) should be correctly aligned with the circuit.

3. Surge Current:

   • Do not exceed the peak forward surge current (IFSM) to avoid damage to the diode. Short-term surges are acceptable but should not be prolonged.

4. Reverse Voltage:

   • Ensure the reverse voltage applied to the diode does not exceed the maximum reverse voltage (VRM) to prevent breakdown.

5. Thermal Management:

   • Monitor the junction temperature (TJ) to ensure it stays within the operating temperature range. Excessive heat can degrade performance and lifespan.

6. Storage:

   • Store the diode in a dry place within the storage temperature range (TSTG) to prevent moisture damage.

7. Handling:

   • Handle the diode with care to avoid mechanical stress or damage to the leads. Use anti-static precautions to prevent electrostatic discharge (ESD) damage.

8. Testing:

   • Before installation, test the diode using a multimeter to ensure it is functioning correctly. Measure the forward and reverse resistance to verify its integrity.