Share:
Specifications
SKU: 302784
Parallel-Input PLL Frequency Synthesizer
| Parameter | Description | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage (Vcc) | Operating supply voltage | 4.5 | 5.0 | 5.5 | V |
| Output Current (Iout) | Maximum output current per pin | - | 25 | - | mA |
| Operating Temperature (Toper) | Operating temperature range | -40 | - | 85 | °C |
| Storage Temperature (Tstg) | Storage temperature range | -65 | - | 150 | °C |
| Input Voltage (Vin) | Input voltage range | 0 | - | Vcc | V |
| Propagation Delay (tpd) | Propagation delay time | 10 | 15 | 20 | ns |
| Power Dissipation (Pd) | Maximum power dissipation | - | - | 625 | mW |
| Quiescent Current (Iq) | Supply current at no load | 0.1 | 0.5 | 1.0 | mA |
Instructions for Use:
- Supply Voltage: Ensure the supply voltage is within the specified range of 4.5V to 5.5V to avoid damage to the device.
- Output Current: Do not exceed the maximum output current of 25mA per pin to prevent overheating and potential failure.
- Operating Temperature: The device is designed to operate within the temperature range of -40°C to 85°C. Ensure proper cooling if operating near the upper limit.
- Storage Temperature: Store the device in an environment with temperatures between -65°C and 150°C to maintain its integrity.
- Input Voltage: Input voltages should be within the range of 0V to Vcc to prevent damage to the input pins.
- Propagation Delay: The typical propagation delay is 15ns, but it can vary between 10ns and 20ns. Design your circuit to accommodate this delay.
- Power Dissipation: The maximum power dissipation is 625mW. Ensure adequate heat dissipation to avoid exceeding this limit.
- Quiescent Current: The supply current at no load is typically 0.5mA, with a minimum of 0.1mA and a maximum of 1.0mA. This should be considered in low-power applications.
Additional Notes:
- Always refer to the datasheet for the most accurate and detailed information.
- Proper PCB layout and grounding techniques are essential for optimal performance and reliability.
- Use appropriate decoupling capacitors near the power supply pins to filter out noise and ensure stable operation.
Inquiry - MC145156P2
