Below is the parameter table and instructions for the R6502BP resistor:

Parameter Table

Instructions

1. Handling and Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid mechanical damage.

2. Mounting:

   • Ensure the PCB is clean and free of contaminants before mounting.
   • Use appropriate soldering techniques to avoid overheating.
   • Soldering temperature should not exceed 300°C.
   • Soldering time should be limited to 3 seconds.

3. Electrical Connections:

   • Ensure the resistor is connected in the correct orientation if it is polarized (though most resistors are non-polarized).
   • Verify the circuit connections to ensure the resistor is placed correctly in the circuit.

4. Testing:

   • Use a multimeter to verify the resistance value after installation.
   • Check for any short circuits or open circuits in the resistor.

5. Environmental Considerations:

   • The resistor can operate over a wide temperature range (-55°C to +155°C), but ensure the ambient temperature does not exceed these limits.
   • Avoid exposure to corrosive environments or high humidity.

6. Safety:

   • Do not exceed the maximum operating voltage (75V) to prevent damage.
   • Ensure proper ventilation when soldering to avoid inhaling fumes.

By following these instructions, you can ensure the optimal performance and longevity of the R6502BP resistor in your application.