Share:
Specifications
SKU: 386600
Low Dropout LDO Regulators VOLT VAR OUTPUT
| Parameter | Description | Value |
|---|---|---|
| Part Number | Full part number | PAH6016CM |
| Type | Type of component | Power Amplifier |
| Frequency Range | Operating frequency range | 698 MHz to 2700 MHz |
| Output Power | Maximum output power at 1 dB compression point | 34 dBm (2.5 W) |
| Gain | Gain at typical operating conditions | 30 dB |
| Power Supply Voltage | Recommended supply voltage | 3.3 V to 5.0 V |
| Operating Temperature | Temperature range for operation | -40°C to +85°C |
| Package Type | Type of package | QFN-16 |
| Pin Count | Number of pins | 16 |
| Quiescent Current | Current consumption when no signal is applied | 100 mA (typical) |
| Shutdown Current | Current consumption in shutdown mode | 1 μA (typical) |
| Input Impedance | Input impedance at operating frequencies | 50 Ω |
| Output Impedance | Output impedance at operating frequencies | 50 Ω |
| Harmonic Distortion | Second and third harmonic distortion at rated output power | -35 dBc (typical) |
| Linear Power | Linear output power at 10% EVM (Error Vector Magnitude) | 28 dBm (630 mW) |
| PSRR (Power Supply Rejection Ratio) | Ability to reject variations in supply voltage | 30 dB (typical) |
| ESD Rating | Electrostatic discharge tolerance | HBM (Human Body Model): 2000 V MM (Machine Model): 200 V |
Instructions for Use
Power Supply:
- Ensure the power supply voltage is within the specified range (3.3 V to 5.0 V).
- Use a clean, stable power source to avoid noise and instability.
Biasing:
- The amplifier requires proper biasing to operate efficiently. Refer to the datasheet for recommended biasing circuits.
Input and Output Matching:
- Match the input and output impedances to 50 Ω using appropriate matching networks to ensure optimal performance and minimize reflections.
Thermal Management:
- Ensure adequate heat dissipation by mounting the component on a suitable heatsink or PCB with good thermal conductivity.
- Avoid operating the device in environments exceeding the maximum temperature limit.
Signal Path:
- Connect the input and output signals correctly to avoid damage and ensure proper operation.
- Use high-quality RF cables and connectors to maintain signal integrity.
Shutdown Mode:
- To reduce power consumption, use the shutdown pin to turn off the amplifier when not in use. Ensure the shutdown pin is properly controlled to avoid unintended operation.
Handling:
- Handle the component with care to avoid physical damage and ESD (Electrostatic Discharge).
- Follow ESD protection guidelines to prevent damage during handling and assembly.
Testing:
- Before finalizing the design, test the amplifier under various operating conditions to ensure it meets the required specifications.
- Use appropriate test equipment and methods to accurately measure performance parameters.
Inquiry - PAH6016CM
