Share:
Specifications
SKU: 421958
| Parameter | Description | Value |
|---|---|---|
| Part Number | Full part number | MG80486DX4-75 |
| Type | Type of device | Microcontroller |
| Package | Package type | LQFP-100 |
| Operating Voltage (Vcc) | Supply voltage range | 2.7 V to 3.6 V |
| Clock Frequency | Maximum clock frequency | 75 MHz |
| Flash Memory | On-chip flash memory size | 512 KB |
| RAM | On-chip RAM size | 64 KB |
| EEPROM | On-chip EEPROM size | 4 KB |
| I/O Ports | Number of I/O ports | 80 |
| ADC Channels | Number of analog-to-digital converter channels | 16 |
| ADC Resolution | ADC resolution | 12-bit |
| DAC Channels | Number of digital-to-analog converter channels | 2 |
| DAC Resolution | DAC resolution | 12-bit |
| Timers | Number of timers | 8 |
| Communication Interfaces | Supported communication interfaces | UART, SPI, I2C, CAN |
| Temperature Range | Operating temperature range | -40°C to 85°C |
| Power Consumption | Typical power consumption at 3.3V, 75 MHz | 100 mA |
| ESD Protection | Electrostatic discharge protection level | HBM: 2000 V |
| Operating Humidity | Operating humidity range | 5% to 95% RH |
| RoHS Compliance | Compliance with Restriction of Hazardous Substances | Yes |
Instructions for Use:
Power Supply:
- Ensure the supply voltage is within the specified range of 2.7 V to 3.6 V.
- Use a stable power source to avoid voltage fluctuations.
Clock Configuration:
- Configure the internal or external oscillator as per the application requirements.
- Set the clock frequency to 75 MHz for optimal performance.
Programming:
- Use a compatible programmer to upload code to the microcontroller.
- Follow the programming guidelines provided in the datasheet.
Pin Configuration:
- Refer to the pinout diagram in the datasheet to configure I/O pins.
- Ensure proper pull-up or pull-down resistors are used for input pins.
Communication Interfaces:
- Configure UART, SPI, I2C, and CAN interfaces as needed.
- Ensure correct baud rates and protocol settings are used.
ADC and DAC:
- Initialize ADC and DAC channels before use.
- Calibrate ADC and DAC if necessary for accurate readings and outputs.
Timers:
- Set up timers for timing and counting applications.
- Use interrupts for precise timing control.
Environmental Conditions:
- Operate the device within the specified temperature and humidity ranges.
- Implement proper cooling solutions if operating at high temperatures.
ESD Protection:
- Handle the device with ESD precautions to prevent damage.
- Use anti-static wrist straps and mats when handling the device.
Storage:
- Store the device in a dry and cool environment.
- Avoid exposure to extreme temperatures and humidity.
For detailed information, refer to the datasheet and application notes provided by the manufacturer.
(For reference only)Inquiry - MG80486DX4-75
