Instructions for Use:

1. Supply Voltage (Vcc):

   • Ensure the input voltage is within the specified range of 4.75V to 5.25V to avoid damage to the device.

2. Output Voltage (Vo):

   • The MC682L provides a regulated output voltage of 5V. No external components are required for this regulation.

3. Line Regulation:

   • The line regulation is very low at 0.01% per volt, ensuring minimal changes in output voltage with variations in input voltage.

4. Load Regulation:

   • The load regulation is also very low at 0.01% per milliamp, ensuring stable output voltage even under varying load conditions.

5. Output Current (Io):

   • The maximum continuous output current is 100mA, with a peak capability of up to 150mA. Ensure the load does not exceed these limits to prevent overheating or damage.

6. Dropout Voltage (Vdo):

   • The dropout voltage is typically 1.2V, meaning the input voltage must be at least 1.2V higher than the output voltage for proper regulation.

7. Quiescent Current (Iq):

   • The quiescent current is 5mA, which is the current consumed by the regulator when no load is applied.

8. Ripple Rejection (RR):

   • The ripple rejection is 70dB, which means the regulator can effectively filter out input voltage ripple, providing a clean output.

9. Operating Temperature (Ta):

   • The operating temperature range is from -40°C to 85°C. Ensure the device operates within this range to maintain reliability.

10. Storage Temperature (Tstg):

    • The storage temperature range is from -65°C to 150°C. Store the device in this range to avoid damage.

Additional Notes:

• Capacitors:
  • While not strictly necessary, adding a 0.1μF ceramic capacitor between the input and ground and a 1μF electrolytic capacitor between the output and ground can improve stability and transient response.
• Heat Dissipation:
  • If operating near the maximum output current, consider using a heatsink to dissipate heat and maintain the operating temperature within safe limits.