Instructions for Use:

1. Power Supply:

   • Connect the VCC pin to a power supply within the specified operating voltage range (4.5V to 5.5V).
   • Connect the GND pin to ground.

2. Input Signals:

   • Apply digital input signals to the input pins (pins 1, 2, 7, 8, 13, 14).
   • Ensure input voltages do not exceed the maximum input voltage (5.5V).

3. Output Signals:

   • The output pins (pins 3, 4, 5, 6, 9, 10, 11, 12) will provide the corresponding logic levels based on the input signals.
   • The low-level output voltage should not exceed 0.4V.

4. Propagation Delay:

   • Consider the typical propagation delay time of 12ns when designing your circuit to ensure proper timing.

5. Temperature Considerations:

   • Operate the device within the specified operating temperature range (-40°C to 85°C) to avoid damage.
   • Store the device within the specified storage temperature range (-65°C to 150°C).

6. Mounting:

   • Use through-hole mounting techniques for secure installation.
   • Ensure proper soldering to avoid cold solder joints and potential failures.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and assembly.