Below is the parameter table and instructions for the SAB8085AH2P:

SAB8085AH2P Parameter Table

Instructions for SAB8085AH2P

1. Power Supply Connection:

   • Connect the positive terminal of the power supply to the Vcc pin.
   • Connect the negative terminal of the power supply to the GND pin.

2. Output Connection:

   • Connect the load to the Vout pin.
   • Ensure that the load does not exceed the maximum output current (1.5 A).

3. Heat Dissipation:

   • If operating at high currents or in high ambient temperatures, use a heatsink to ensure the junction temperature does not exceed 150°C.
   • Calculate the power dissipation using the formula: ( P = (V_ - V_) times I_ ).
   • Use the thermal resistance (RθJA) to determine the temperature rise: ( Delta T = P times R_{theta JA} ).

4. Capacitors:

   • Place a 10 μF electrolytic capacitor between Vcc and GND close to the device to stabilize the input voltage.
   • Place a 10 μF electrolytic capacitor between Vout and GND to stabilize the output voltage.

5. Operating Conditions:

   • Ensure the supply voltage (Vcc) is within the range of 4.5 V to 5.5 V.
   • Operate the device within the specified temperature range (-40°C to 85°C).

6. Protection:

   • The device includes overcurrent and thermal shutdown protection.
   • In case of overcurrent, the device will limit the output current to prevent damage.
   • In case of overheating, the device will shut down until it cools down to a safe temperature.

7. Storage:

   • Store the device in a dry environment with temperatures between -65°C and 150°C.

By following these instructions, you can ensure reliable and efficient operation of the SAB8085AH2P.