Share:
Specifications
SKU: 478252
1A, 8V,±4% Tolerance, Voltage Regulator, Ta = -40°C to +125°C; Package: 3 LEAD D2PAK; No of Pins: 3; Container: Tape and Reel; Qty per Container: 800
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | Operating | 2.0 | - | 6.0 | V |
| Input Voltage (High Level) | VIH | - | 3.5 | - | VCC | V |
| Input Voltage (Low Level) | VIL | - | 0 | - | 1.5 | V |
| Output Voltage (High Level) | VOH | IO = -0.4 mA | - | - | VCC - 0.1 | V |
| Output Voltage (Low Level) | VOL | IO = 4.0 mA | 0 | - | 0.2 | V |
| Input Leakage Current | IIL | VI = 0 to VCC | -1.0 | - | 1.0 | μA |
| Output Low-Level Current | IOL | VOL = 0.4 V | - | - | -24 | mA |
| Output High-Level Current | IOH | VOH = VCC - 0.4 V | -24 | - | - | mA |
| Propagation Delay Time | tpd | VCC = 5 V, TA = 25°C | 0 | - | 12 | ns |
| Power Dissipation | PD | Maximum | - | - | 100 | mW |
| Operating Temperature Range | TA | - | -40 | - | 85 | °C |
| Storage Temperature Range | TSTG | - | -65 | - | 150 | °C |
Instructions for Using SN74HC688N
Power Supply:
- Ensure the supply voltage (VCC) is within the range of 2.0 V to 6.0 V.
- Connect the ground (GND) pin to the system ground.
Input Signals:
- Apply input signals (VIH and VIL) that meet the specified voltage levels.
- Ensure input leakage current (IIL) does not exceed ±1.0 μA.
Output Signals:
- The output high-level voltage (VOH) should be at least VCC - 0.1 V when sourcing up to -0.4 mA.
- The output low-level voltage (VOL) should be no more than 0.2 V when sinking up to 4.0 mA.
Propagation Delay:
- The propagation delay time (tpd) is typically 12 ns at VCC = 5 V and TA = 25°C.
Temperature Considerations:
- Operate the device within the temperature range of -40°C to 85°C.
- Store the device within the temperature range of -65°C to 150°C.
Power Dissipation:
- Do not exceed the maximum power dissipation (PD) of 100 mW.
Handling and Storage:
- Handle the device with care to avoid static damage.
- Store in a dry environment to prevent moisture damage.
Testing and Troubleshooting:
- Use a multimeter to verify supply voltages and output levels.
- Check for proper connections and ensure all pins are correctly wired.
By following these guidelines, you can ensure reliable operation of the SN74HC688N in your application.
(For reference only)Inquiry - SN74HC688N
