Instructions for Using XC9572:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 3.0V to 3.6V.
   • Connect the V_CC pin to the power supply and GND pin to ground.

2. Clock Input:

   • Apply the clock signal to the appropriate input pin.
   • The maximum clock frequency (f_MAX) is 100 MHz.

3. Input Signals:

   • Input signals should be within the valid logic levels:
     • High (V_IH): 2.0V to 3.6V
     • Low (V_IL): 0V to 0.8V

4. Output Signals:

   • Output signals will be within the following levels:
     • High (V_OH): 2.4V to 3.6V
     • Low (V_OL): 0V to 0.4V

5. Propagation Delay:

   • The typical propagation delay time (t_pd) is 5.5 ns.

6. Operating and Storage Temperature:

   • The device can operate within a temperature range of -40°C to 85°C.
   • Store the device within a temperature range of -65°C to 150°C.

7. Supply Current:

   • Active mode current (I_CC) is typically 10 mA.
   • Standby mode current (I_CC (Standby)) is typically 1 μA.

8. Output Drive Capability:

   • The device can source up to 4 mA (I_OH) and sink up to -4 mA (I_OL).

9. Transition Times:

   • High-to-Low transition time (t_phl) is typically 2.5 ns.
   • Low-to-High transition time (t_plh) is typically 2.5 ns.

10. Handling:

    • Handle the device with care to avoid static damage.
    • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.