Share:
Specifications
SKU: 503299
Circular Connector; No. of Contacts:55; Series:MS27656; Body Material:Aluminum; Connecting Termination:Crimp; Connector Shell Size:17; Circular Contact Gender:Pin; Circular Shell Style:Wall Mount Receptacle; Insert Arrangement:17-35 RoHS Compliant: No
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions |
|---|---|---|---|---|---|---|
| Input Voltage | VGS | -0.3 | 20 | V | ||
| Continuous Drain Current | ID | 2.5 | 4.2 | A | VDS=5V, TJ=25°C | |
| Peak Drain Current | IDpeak | 6.5 | 8.5 | A | VDS=5V, TJ=25°C, Pulse Width ≤ 100 μs | |
| Drain-Source Breakdown Voltage | VDS | 30 | 30 | V | VGS=0V | |
| Gate-Source Voltage | VGS | -2 | 4 | V | ||
| Gate Charge | QG | 9 | 11 | nC | ||
| Threshold Voltage | VGS(th) | 0.7 | 1.2 | 1.8 | V | ID=250 μA |
| On-State Resistance | RDS(on) | 55 | 70 | 90 | mΩ | VGS=4.5V, ID=2.5A, TJ=25°C |
| Total Power Dissipation | PTOT | 1.4 | W | TC=25°C | ||
| Junction Temperature | TJ | -40 | 150 | °C | ||
| Storage Temperature | TSTG | -40 | 150 | °C |
Instructions for Use:
Handling:
- Handle with care to avoid static damage.
- Use appropriate ESD protection when handling the device.
Mounting:
- Ensure proper heat sinking if operating at high current or power levels.
- Follow recommended PCB layout guidelines to minimize parasitic inductance and ensure good thermal performance.
Biasing:
- Apply the gate-source voltage (VGS) within the specified range to avoid damaging the device.
- Ensure that the drain-source voltage (VDS) does not exceed the breakdown voltage.
Operation:
- Do not exceed the maximum continuous drain current (ID) or peak drain current (IDpeak).
- Monitor the junction temperature (TJ) to prevent overheating.
Storage:
- Store in a dry, cool place away from direct sunlight and sources of heat.
- Avoid exposure to corrosive environments.
Testing:
- Use a constant current source to test the on-state resistance (RDS(on)) to ensure accurate measurements.
- Verify the threshold voltage (VGS(th)) using a precise voltmeter.
Troubleshooting:
- If the device fails to turn on, check the gate-source voltage and ensure it is within the specified range.
- If the device overheats, check the heat sink and ensure proper cooling.
For more detailed information, refer to the datasheet provided by Alpha & Omega Semiconductor.
(For reference only)Inquiry - AO4422
