Instructions for Use:

1. Handling:

   • Handle with care to avoid damage to the component.
   • Use appropriate ESD (Electrostatic Discharge) protection measures.

2. Soldering:

   • Preheat the PCB to 100°C to 120°C before soldering.
   • Use a soldering iron with a temperature setting between 260°C and 300°C.
   • Apply solder to the pad and then place the component, ensuring it is aligned correctly.
   • Avoid overheating the component; soldering time should not exceed 3 seconds per joint.

3. Storage:

   • Store in a dry, cool environment to prevent moisture damage.
   • Keep away from direct sunlight and sources of heat.

4. Inspection:

   • Visually inspect the component and solder joints for any defects or misalignments.
   • Use a multimeter to verify the resistance value if necessary.

5. Usage:

   • Ensure the operating conditions (voltage, temperature, etc.) do not exceed the specified limits.
   • For optimal performance, use within the recommended operating range.