Share:
Specifications
SKU: 569944
AC Input-Transistor Output Optocoupler, 1-Element, 5300V Isolation, ROHS COMPLIANT, PLASTIC, DIP-4
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions |
|---|---|---|---|---|---|---|
| Forward Voltage | VF | - | 1.2 | 1.5 | V | IF = 20 mA, Ta = 25°C |
| Peak Forward Current | IF(P) | - | - | 1 A | A | tP = 1 ms, Duty = 1/10 |
| Continuous Forward Current | IF | - | - | 30 | mA | Ta = 25°C |
| Reverse Breakdown Voltage | VBR | 5 | - | 7 | V | IR = 10 μA, Ta = 25°C |
| Output Collector-Emitter Saturation Voltage | VCE(sat) | - | 0.4 | 0.7 | V | IC = 10 mA, IF = 5 mA, Ta = 25°C |
| Output Collector Current | IC | - | - | 10 | mA | VCE = 5 V, IF = 5 mA, Ta = 25°C |
| Isolation Voltage | VIORM | - | - | 2500 | Vrms | 1 min, 50/60 Hz |
| Storage Temperature | TSTG | -40 | - | 100 | °C | - |
| Operating Temperature | TA | -40 | - | 85 | °C | - |
Instructions for Use
Mounting and Handling:
- Handle the device with care to avoid mechanical damage.
- Ensure proper mounting to prevent excessive stress on the leads.
Electrical Connections:
- Connect the input (anode and cathode) to the control circuit.
- Connect the output (collector and emitter) to the load circuit.
- Ensure all connections are secure and free from shorts or open circuits.
Forward Current:
- Do not exceed the maximum continuous forward current (IF) of 30 mA.
- For peak conditions, do not exceed 1 A for a pulse duration of 1 ms with a duty cycle of 1/10.
Reverse Voltage:
- Ensure the reverse voltage does not exceed the reverse breakdown voltage (VBR) of 7 V to prevent damage.
Output Current:
- The maximum output collector current (IC) is 10 mA. Exceeding this can lead to device failure.
Isolation Voltage:
- The device provides isolation up to 2500 Vrms for 1 minute at 50/60 Hz. Ensure this is not exceeded to maintain safety and performance.
Temperature Considerations:
- The storage temperature range is -40°C to 100°C.
- The operating temperature range is -40°C to 85°C. Ensure the device operates within these limits to avoid thermal damage.
Testing and Verification:
- Perform initial testing under controlled conditions to verify correct operation.
- Regularly check for any signs of wear or damage and replace the device if necessary.
Compliance and Standards:
- Ensure the device complies with relevant safety and regulatory standards for your application.
By following these guidelines, you can ensure reliable and safe operation of the TLP626 optocoupler.
(For reference only)Inquiry - TLP626
