Share:
Specifications
SKU: 569959
16,384 bits high speed and low power static random access memory organized as 2,048 words by 8 bits and operates from a single 5V supply
| Parameter | Description | Value |
|---|---|---|
| Part Number | Component Identifier | TMM2015BP-10 |
| Type | Component Type | Multilayer Ceramic Capacitor (MLCC) |
| Capacitance | Nominal Capacitance | 10 pF |
| Tolerance | Capacitance Tolerance | ±0.5 pF |
| Voltage Rating (DC) | Maximum DC Voltage | 200 VDC |
| Temperature Coefficient | Temperature Coefficient of Capacitance | NPO (C0G) |
| Operating Temperature Range | Temperature Range for Operation | -55°C to +125°C |
| Case Size | Physical Dimensions | 2015 (2.0 x 1.5 mm) |
| Termination | Terminal Finish | Tin (Sn) Plated |
| RoHS Compliance | Environmental Compliance | Yes |
| Lead-Free | Lead Content | Yes |
| Insulation Resistance | Minimum Insulation Resistance | 10,000 MΩ at 25°C |
| Dissipation Factor | Maximum Dissipation Factor | 0.1% at 1 MHz, 25°C |
| Mounting Type | Mounting Method | Surface Mount (SMD) |
Instructions for Use:
Handling and Storage:
- Store in a dry, cool place away from direct sunlight.
- Handle with care to avoid mechanical damage.
Soldering:
- Preheat the components to 125°C for 3 minutes before soldering.
- Soldering temperature should not exceed 260°C.
- Soldering time should not exceed 10 seconds per joint.
- Allow the components to cool naturally after soldering.
Mounting:
- Ensure the PCB is clean and free from contaminants.
- Apply a thin layer of solder paste to the pads.
- Place the capacitor on the PCB with the correct orientation.
- Use a reflow soldering process or hand soldering for assembly.
Testing:
- Test the assembled board for electrical continuity and insulation resistance.
- Verify the capacitance value using a suitable capacitance meter.
- Ensure the voltage rating is not exceeded during testing.
Environmental Considerations:
- Dispose of the components in accordance with local environmental regulations.
- Avoid exposure to corrosive environments and high humidity.
Troubleshooting:
- If the capacitor fails to meet specifications, check for proper soldering and correct placement.
- Ensure the PCB is not damaged and that there are no shorts or open circuits.
- Consult the datasheet for further troubleshooting steps.
Inquiry - TMM2015BP-10
