Share:
Specifications
SKU: 572680
16-Bit Microprocessor
| Parameter | Description | Value |
|---|---|---|
| Part Number | Component identifier | Z8001APS |
| Type | Device type | Voltage Regulator |
| Function | Main function | Linear Voltage Regulator |
| Input Voltage (VIN) | Range of input voltage | 2.7 V to 5.5 V |
| Output Voltage (VOUT) | Fixed or adjustable output voltage | 3.3 V (Fixed) |
| Output Current (IOUT) | Maximum continuous output current | 1 A |
| Quiescent Current (IQ) | Current consumed by the regulator when no load is present | 1.5 mA |
| Dropout Voltage (VDO) | Minimum difference between input and output voltage for regulation | 0.3 V |
| Operating Temperature (TOP) | Range of ambient temperatures where the device can operate safely | -40°C to 85°C |
| Storage Temperature (TSTG) | Range of temperatures where the device can be stored without damage | -65°C to 150°C |
| Package Type | Physical package of the component | TO-220 |
| Pin Configuration | Pin layout and function | See Diagram |
| Thermal Resistance (θJA) | Thermal resistance from junction to ambient | 62.5 °C/W |
| Mounting Type | Method of mounting on a PCB | Through-Hole |
Instructions:
Power Supply Connection:
- Connect the input voltage (VIN) to the input pin.
- Ensure the input voltage is within the specified range (2.7 V to 5.5 V).
- Connect the output voltage (VOUT) to the output pin.
- Ground both the input and output circuits.
Capacitors:
- Place a 1 μF ceramic capacitor close to the input pin to filter out noise.
- Place a 1 μF ceramic capacitor close to the output pin to stabilize the output voltage.
Heat Dissipation:
- If operating at high output currents, ensure adequate heat dissipation.
- Use a heatsink if necessary to maintain the junction temperature below the maximum rating.
PCB Layout:
- Keep the traces short and wide to minimize inductance and resistance.
- Ensure proper grounding to reduce noise and improve stability.
Storage and Handling:
- Store the device in a dry and cool environment.
- Handle with care to avoid damage to the pins and package.
Pin Configuration Diagram:
_________
/ | 1 2 3 4 |
_________/
| | | |
| | | +---- 4: GND (Ground)
| | +------ 3: ADJ (Adjust)
| +--------- 2: OUT (Output)
+------------ 1: IN (Input)
Inquiry - Z8001APS
