Share:
Specifications
SKU: 622825
Surface Mount Glass Passivated Junction Rectifier
| Parameter | Description | Value |
|---|---|---|
| Part Number | Full part number | GF1G |
| Type | Type of component | Gate Driver |
| Supply Voltage (Vcc) | Operating supply voltage range | 4.5V to 20V |
| Output Current | Maximum output current | ±1.5A |
| Input Voltage (Vin) | Input voltage range for control signals | 3.3V to 5V |
| Propagation Delay | Time delay from input to output | 50ns max |
| Operating Temperature | Temperature range for operation | -40°C to 125°C |
| Storage Temperature | Temperature range for storage | -65°C to 150°C |
| Package | Type of package | SOIC-8 |
| Pin Count | Number of pins | 8 |
| Isolation Voltage | Isolation between input and output | 2.5kV |
Instructions for Use
Power Supply Connection:
- Connect the supply voltage (Vcc) to pin 8.
- Connect the ground (GND) to pin 4.
Input Signal:
- Apply the control signal to pin 1 (IN).
- Ensure the input voltage is within the specified range (3.3V to 5V).
Output Configuration:
- The output (OUT) is available on pin 5.
- Connect the load or gate of the MOSFET/IGBT to this pin.
Bootstrap Capacitor:
- For high-side drive applications, connect a bootstrap capacitor between pin 7 (BOOT) and pin 6 (SW).
Thermal Management:
- Ensure adequate heat dissipation if operating at high currents or temperatures.
- Consider using a heatsink if necessary.
Storage and Handling:
- Store the component in a dry environment within the specified temperature range.
- Handle with care to avoid damage to the pins and package.
Safety Precautions:
- Do not exceed the maximum ratings for supply voltage, output current, and temperature.
- Ensure proper isolation when working with high voltages.
Inquiry - GF1G
