Share:
Specifications
SKU: 653203
HEX D-TYPE FLIP FLOP WITH CLEAR
| Parameter | Symbol | Conditions | Min | Typical | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | Operating | 2.0 | - | 6.0 | V |
| Input Low Voltage | VIL | VCC = 4.5V to 5.5V | - | - | 1.5 | V |
| Input High Voltage | VIH | VCC = 4.5V to 5.5V | 3.5 | - | - | V |
| Output Low Voltage | VOL | IOL = 4mA, VCC = 4.5V to 5.5V | 0.25 | - | 0.4 | V |
| Output High Voltage | VOH | IOH = -4mA, VCC = 4.5V to 5.5V | 4.6 | - | 5.0 | V |
| Propagation Delay Time | tpd | VCC = 4.5V to 5.5V, TA = 25°C | - | 10 | - | ns |
| Power Consumption | Ptot | VCC = 4.5V to 5.5V, fosc = 10MHz | - | 10 | - | mW |
Instructions for Use:
Power Supply:
- Ensure the supply voltage (VCC) is within the range of 2.0V to 6.0V.
- Connect the ground (GND) pin to a stable 0V reference.
Input Signals:
- Apply input signals with voltages between 0V and VCC.
- For reliable operation, ensure that the input low voltage (VIL) does not exceed 1.5V and the input high voltage (VIH) is at least 3.5V when VCC is between 4.5V and 5.5V.
Output Signals:
- The output low voltage (VOL) should be less than or equal to 0.4V when sourcing 4mA.
- The output high voltage (VOH) should be greater than or equal to 4.6V when sinking 4mA.
Propagation Delay:
- The propagation delay time (tpd) is typically 10ns at 25°C and VCC between 4.5V and 5.5V.
Power Consumption:
- The total power consumption (Ptot) is typically 10mW at 10MHz and VCC between 4.5V and 5.5V.
Handling:
- Handle the device with care to avoid static damage.
- Follow proper soldering techniques to ensure reliable connections.
Storage:
- Store the device in a dry environment to prevent moisture damage.
Testing:
- Before integrating the device into a circuit, test it using a known good setup to verify functionality.
Compliance:
- Ensure the device complies with all relevant safety and regulatory standards for your application.
Inquiry - M74HC174B1
