Share:
Specifications
SKU: 672255
1024-WORD BY 8-BIT ERASABLE PROGRAMMABLE READ-ONLY MEMORIES
| Parameter | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage | Vcc | 4.5 | 5.0 | 5.5 | V |
| Operating Temperature | Ta | -40 | 85 | °C | |
| Storage Temperature | Tstg | -65 | 150 | °C | |
| Output Current (High) | Ioh | -20 | -2.5 | mA | |
| Output Current (Low) | Iol | 1.5 | 20 | mA | |
| Input Leakage Current | Iil | -1 | 1 | μA | |
| Propagation Delay Time | tpd | 12 | 15 | 18 | ns |
| Power Dissipation | Pd | 100 | mW | ||
| Input Capacitance | Cin | 15 | pF | ||
| Output Capacitance | Cout | 15 | pF |
Instructions for Use
Supply Voltage:
- Ensure the supply voltage is within the range of 4.5V to 5.5V to avoid damage to the device.
Temperature Range:
- The operating temperature range is from -40°C to 85°C. Store the device between -65°C and 150°C.
Output Current:
- When driving loads, ensure the output current does not exceed -2.5mA (high state) or 20mA (low state).
Input Leakage Current:
- The input leakage current should be kept within ±1μA to maintain proper operation.
Propagation Delay:
- The typical propagation delay time is 15ns, with a minimum of 12ns and a maximum of 18ns.
Power Dissipation:
- The maximum power dissipation is 100mW. Ensure adequate heat dissipation if operating near this limit.
Capacitance:
- The input and output capacitance are both typically 15pF. Design your circuit to account for these values to avoid signal integrity issues.
Handling:
- Handle the device with care to avoid static discharge. Use appropriate ESD protection measures.
Mounting:
- Follow standard surface mount technology (SMT) procedures for mounting the device on the PCB.
Testing:
- Before final assembly, test the device to ensure it meets all specified parameters and operates correctly.
Inquiry - TMS2732A-20JL
