Share:
Specifications
SKU: 680624
N-channel TrenchMOS transistorN TrenchMOS
| Parameter | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Continuous Drain Current | ID | - | 25 | - | A |
| Pulse Drain Current (t = 10 ms) | IGM | - | 75 | - | A |
| Drain-Source On-State Resistance at 25°C | RDS(on) @ 25°C | - | 4.0 | - | mΩ |
| Drain-Source On-State Resistance at 100°C | RDS(on) @ 100°C | - | 6.0 | - | mΩ |
| Gate-Source Threshold Voltage | VGS(th) | 1.5 | 2.5 | 4.0 | V |
| Maximum Drain-Source Voltage | VDS(max) | - | - | 100 | V |
| Gate-Source Voltage | VGS | -15 | - | 15 | V |
| Total Power Dissipation (Tc=25°C) | PD | - | - | 380 | W |
| Junction Temperature | TJ | -55 | - | 150 | °C |
| Storage Temperature Range | TSTG | -55 | - | 150 | °C |
Instructions for PSMN025-100D
Handling Precautions:
- Use appropriate ESD protection to avoid damage to the device.
- Avoid mechanical stress on the leads during soldering and handling.
Mounting:
- Ensure proper thermal management by using a heatsink if necessary.
- Follow the recommended PCB layout guidelines for optimal performance and heat dissipation.
Soldering:
- Use a soldering iron with a temperature not exceeding 300°C.
- Soldering time should not exceed 10 seconds per lead.
Electrical Connections:
- Connect the drain (D), source (S), and gate (G) terminals correctly.
- Ensure that the gate-source voltage (VGS) is within the specified range to prevent damage.
Operating Conditions:
- Do not exceed the maximum ratings listed in the table.
- Monitor the junction temperature (TJ) to ensure it remains within safe limits.
Testing:
- Perform initial testing under controlled conditions to verify proper operation.
- Use a suitable load to test the continuous drain current (ID) and pulse drain current (IGM).
Storage:
- Store the device in a dry, cool place away from direct sunlight and sources of heat.
- Keep the device in its original packaging until ready for use to protect against static discharge.
Troubleshooting:
- If the device fails to operate as expected, check for correct wiring, power supply, and load connections.
- Measure the gate-source voltage (VGS) and drain-source voltage (VDS) to diagnose issues.
Disposal:
- Dispose of the device according to local regulations for electronic waste.
- Do not incinerate or dispose of the device in a landfill.
Inquiry - PSMN025-100D
