Share:
Specifications
SKU: 724878
| Parameter | Description | Value |
|---|---|---|
| Part Number | HP4661 | - |
| Type | High Precision Resistor | - |
| Resistance | Nominal Resistance | 1000 Ω |
| Tolerance | Resistance Tolerance | ±0.01% |
| Temperature Coefficient of Resistance (TCR) | Change in resistance per degree Celsius | ±0.3 ppm/°C |
| Power Rating | Maximum Power Dissipation | 0.25 W |
| Operating Temperature Range | Temperature range for operation | -55°C to +125°C |
| Voltage Rating | Maximum Voltage | 200 V |
| Stability | Long-term stability over time | ±0.005% per year |
| Packaging | Package Type | Through-hole |
| Material | Resistor Material | Metal Film |
| Mounting | Mounting Style | Axial Leads |
| Compliance | Standards Compliance | RoHS, REACH |
Instructions for Use:
Handling:
- Handle the resistor with care to avoid mechanical stress.
- Avoid touching the resistor body to prevent contamination.
Installation:
- Ensure that the leads are bent gently to avoid damaging the resistor.
- Solder the resistor to the PCB using a temperature-controlled soldering iron.
- Do not exceed the maximum soldering temperature of 260°C for more than 10 seconds.
Soldering:
- Allow the resistor to cool down after soldering before testing or using the circuit.
- Inspect the solder joints for proper wetting and ensure there are no cold solder joints.
Testing:
- Measure the resistance using a high-precision multimeter to verify it is within the specified tolerance.
- Check for any physical damage or signs of overheating.
Storage:
- Store the resistors in a dry, cool place away from direct sunlight.
- Keep the resistors in their original packaging until ready to use to protect them from environmental factors.
Environmental Considerations:
- Dispose of any non-functional resistors according to local environmental regulations.
- Ensure compliance with all relevant standards and regulations during use and disposal.
Inquiry - HP4661
