Instructions for Use:

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 1.65V to 3.6V.
   • Connect V_CC to the positive power supply and GND to the ground.

2. Input Levels:

   • Input high (V_IH) should be at least 2.0V and can go up to V_CC.
   • Input low (V_IL) should be no more than 0.8V.

3. Output Levels:

   • Output high (V_OH) will be V_CC - 0.1V when the output current is -4 mA.
   • Output low (V_OL) will be no more than 0.1V when the output current is 4 mA.

4. Current Limits:

   • The maximum output high current (I_OH) is 4 mA.
   • The maximum output low current (I_OL) is -4 mA.

5. Timing Parameters:

   • Propagation delay time (t_pd) is the time it takes for the output to change after the input changes. It should be between 3.5 ns and 7 ns.
   • Skew (t_skew) is the difference in propagation delay between different outputs. It should be between 1.5 ns and 3.5 ns.
   • Output change time (t_CO) is the time it takes for the output to reach its final state after the enable signal changes. It should be between 1.5 ns and 3.5 ns.
   • Setup time (t_SU) is the minimum time before the clock edge that the data must be stable. It should be between 1.5 ns and 3.5 ns.
   • Hold time (t_H) is the minimum time after the clock edge that the data must remain stable. It should be between 0 ns and 1.5 ns.

6. Handling and Storage:

   • Handle the device with care to avoid electrostatic discharge (ESD).
   • Store the device in a dry environment to prevent moisture damage.

7. Applications:

   • Suitable for bus interfacing and data line driving in systems requiring low-voltage operation and high-speed performance.