Share:
Specifications
SKU: 759569
Single Phase 3.0 AMPS. Glass Passivated Bridge Rectifiers
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Input Voltage | V_IN | 2.7 | - | 5.5 | V | Operating input voltage range |
| Output Voltage | V_OUT | - | 3.3 | - | V | Fixed output voltage |
| Output Current | I_OUT | - | 300 | - | mA | Maximum continuous output current |
| Quiescent Current | I_Q | - | 1.0 | - | μA | Typical quiescent current |
| Dropout Voltage | V_DROPOUT | - | 0.3 | - | V | Typical dropout voltage at I_OUT = 300mA |
| Load Regulation | - | - | 1% | - | % | Load regulation from 0 to 300mA |
| Line Regulation | - | - | 1% | - | % | Line regulation over input range |
| Ripple Rejection | - | - | 60 | - | dB | Typical ripple rejection at 1kHz |
| Operating Temp | T_OP | -40 | - | 85 | °C | Operating temperature range |
| Storage Temp | T_STG | -65 | - | 150 | °C | Storage temperature range |
Instructions for Use:
Input Connection:
- Connect the input voltage (V_IN) to the input pin of the KBP307.
- Ensure the input voltage is within the specified range of 2.7V to 5.5V.
Output Connection:
- Connect the output pin of the KBP307 to the load or circuit requiring a regulated 3.3V supply.
- The maximum output current is 300mA.
Ground Connection:
- Connect the ground (GND) pin to the common ground of the system.
Capacitors:
- Place a 1μF ceramic capacitor between the input pin and ground to filter input noise.
- Place a 1μF ceramic capacitor between the output pin and ground to stabilize the output voltage.
Thermal Considerations:
- Ensure adequate heat dissipation if operating near the maximum output current, especially at higher ambient temperatures.
- The device can operate up to 85°C, but performance may degrade at higher temperatures.
Storage:
- Store the KBP307 in a dry environment within the temperature range of -65°C to 150°C.
Handling:
- Handle with care to avoid static damage. Use appropriate ESD protection measures.
Testing:
- Before finalizing the design, test the regulator under various load conditions to ensure stability and performance meet the requirements.
Inquiry - KBP307
