Share:
Specifications
SKU: 765080
Am486DX - Am486DX Block Diagram
| Parameter | Description | Value |
|---|---|---|
| Part Number | Full part number | AM486DX4-100V16BHC |
| Type | Microprocessor | |
| Series | AM486DX4 | |
| Clock Speed | Operating frequency | 100 MHz |
| Data Bus Width | Width of the data bus | 32 bits |
| Address Bus Width | Width of the address bus | 32 bits |
| Cache Size | On-chip cache memory | 16 KB |
| Voltage - Supply (Vcc) | Supply voltage range | 5 V |
| Package | Type of package | PGA (Pin Grid Array) |
| Pin Count | Number of pins | 169 |
| Operating Temperature | Range of operating temperatures | 0°C to 70°C |
| Max Power Consumption | Maximum power consumption | 6.5 W |
| Multiplier | Clock multiplier | 4x |
| Socket Type | Compatible socket type | Socket 3 |
| Instruction Set | Supported instruction set | x86 |
| Features | Key features | Enhanced 486 core, built-in cache controller, power management |
Instructions for Use:
Power Supply:
- Ensure that the supply voltage is within the specified range (5 V).
- Use appropriate decoupling capacitors to stabilize the power supply.
Clock Configuration:
- Connect an external clock source to the clock input pin.
- The internal clock multiplier will multiply the external clock by 4 to achieve the 100 MHz operating frequency.
Socket Installation:
- Insert the processor into the Socket 3 connector carefully, aligning the notches or key pins.
- Secure the processor in place using the retention mechanism provided by the socket.
Heat Dissipation:
- Use a suitable heat sink to dissipate the heat generated by the processor.
- Ensure adequate airflow around the processor to maintain operating temperature within the specified range.
Memory Configuration:
- Connect the data and address buses to the appropriate memory modules.
- Configure the memory settings according to the system requirements.
System Initialization:
- Follow the system initialization sequence as specified in the system design documentation.
- Ensure that all necessary reset and initialization signals are properly managed.
Software Compatibility:
- Use software and operating systems that are compatible with the x86 instruction set.
- Optimize software performance by utilizing the enhanced features of the AM486DX4 processor.
Testing and Validation:
- Perform thorough testing to ensure the processor is functioning correctly.
- Validate the system under various conditions to ensure reliability and stability.
Inquiry - AM486DX4-100V16BHC
