Instructions for Use

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Use appropriate ESD protection to prevent electrostatic discharge.

2. Mounting:

   • Ensure the PCB is clean and free from contaminants.
   • Use a soldering iron with a temperature setting appropriate for the component (typically 300°C to 350°C).
   • Apply a small amount of solder paste to the pads before placing the capacitor.
   • Place the capacitor on the PCB ensuring it is aligned correctly.
   • Solder the component using a reflow process or hand soldering method.

3. Soldering:

   • Ensure the solder joints are smooth and free of voids.
   • Avoid excessive heat and prolonged soldering time to prevent damage to the capacitor.

4. Inspection:

   • Visually inspect the solder joints for quality.
   • Use a multimeter to check for short circuits and verify the capacitance value if necessary.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep the components in their original packaging until ready for use.

6. Disposal:

   • Dispose of the component according to local environmental regulations.