Instructions for Use

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 4.75V to 5.25V.
   • Connect the ground (GND) pin to a stable 0V reference.

2. Input Signals:

   • Input signals should be within the specified voltage levels:
     • Low input (V_IL): 0V to 0.8V
     • High input (V_IH): 2.0V to V_CC

3. Output Signals:

   • The output will be:
     • Low (V_OL): 0V to 0.4V
     • High (V_OH): 2.4V to V_CC - 0.5V

4. Propagation Delay:

   • The propagation delay time (t_pd) is typically 15ns but can vary between 15ns and 35ns.

5. Power Dissipation:

   • The maximum power dissipation (P_TOT) is 100mW. Ensure adequate heat dissipation if operating near this limit.

6. Temperature Ranges:

   • Operating Temperature (T_A): -40°C to 85°C
   • Storage Temperature (T_STG): -65°C to 150°C

7. Handling and Storage:

   • Store the device in a dry, cool place to avoid moisture damage.
   • Handle with care to prevent static discharge, which can damage the device.

8. Mounting:

   • Ensure proper mounting to a PCB with appropriate soldering techniques.
   • Verify all connections are secure and free from shorts or open circuits.

9. Testing:

   • Test the device under controlled conditions to ensure it meets the specified parameters.
   • Use a multimeter or oscilloscope to verify input and output voltages and timing characteristics.