Instructions for Use:

1. Mounting:

   • Ensure proper heat sinking to maintain the junction temperature within the specified range.
   • Use a flat surface for mounting to ensure good thermal contact.

2. Soldering:

   • Preheat the PCB to 100°C before soldering.
   • Soldering temperature should not exceed 260°C.
   • Soldering time should be limited to 10 seconds per connection.

3. Handling:

   • Handle with care to avoid mechanical stress on the leads and body.
   • Use ESD (Electrostatic Discharge) precautions to prevent damage.

4. Storage:

   • Store in a dry place away from direct sunlight and extreme temperatures.
   • Follow the recommended storage temperature range to avoid degradation.

5. Testing:

   • Use a constant current source for testing to avoid exceeding the maximum ratings.
   • Measure forward voltage drop (VF) and reverse recovery time (trr) under controlled conditions.

6. Applications:

   • Suitable for high-efficiency power supplies, battery chargers, and motor control circuits.
   • Ideal for applications requiring low forward voltage drop and fast switching.

7. Safety:

   • Do not exceed the maximum ratings as it can lead to device failure or permanent damage.
   • Ensure proper ventilation when soldering to avoid inhaling fumes.