Share:
Specifications
SKU: 825182
HEXhEX BUFFER/CONVERTERS
Below is the parameter table and instructions for the HCF4049UBEY, which is a Hex Inverting Buffer/Driver with Schmitt Trigger Inputs.
HCF4049UBEY Parameter Table
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 3.0 | - | 18 | V | - |
| Input Low Voltage | VIL | - | 0.5 | 1.5 | V | VCC = 5V |
| Input High Voltage | VIH | 3.5 | - | 5.0 | V | VCC = 5V |
| Output Low Voltage | VOL | 0.0 | 0.1 | 0.2 | V | IOL = 16mA |
| Output High Voltage | VOH | 4.8 | 4.9 | 5.0 | V | IOH = -1.6mA |
| Input Leakage Current | IIL | -1 | -0.1 | 1 | μA | VCC = 5V |
| Output Sink Current | IOL | 16 | - | 25 | mA | VCC = 5V |
| Output Source Current | IOH | -1.6 | - | -2.5 | mA | VCC = 5V |
| Propagation Delay Time (Low to High) | tPLH | - | 10 | 25 | ns | VCC = 5V, VOH = 3.5V, VOL = 1.5V |
| Propagation Delay Time (High to Low) | tPHL | - | 10 | 25 | ns | VCC = 5V, VOH = 3.5V, VOL = 1.5V |
| Power Dissipation | PD | - | - | 100 | mW | Per Gate |
| Operating Temperature Range | TA | -40 | - | 85 | °C | - |
Instructions for HCF4049UBEY
Power Supply:
- Connect the supply voltage (VCC) to pin 14 and ground (GND) to pin 7.
- Ensure the supply voltage is within the specified range of 3.0V to 18V.
Input Connections:
- Connect the input signals to pins 1, 2, 4, 5, 12, and 13.
- Ensure that the input voltages are within the specified range to avoid damage to the device.
Output Connections:
- Connect the output signals from pins 3, 6, 8, 9, 10, and 11.
- Do not exceed the maximum output current ratings to prevent damage.
Schmitt Trigger Inputs:
- The inputs have Schmitt trigger characteristics, which provide noise immunity and hysteresis.
- This helps in stabilizing the output when the input signal is near the threshold levels.
Propagation Delay:
- The propagation delay times (tPLH and tPHL) are important for timing considerations in digital circuits.
- Use these values to ensure proper timing in your design.
Power Dissipation:
- Each gate has a power dissipation limit of 100mW. Ensure that the total power dissipation does not exceed this limit to avoid overheating.
Operating Temperature:
- The device can operate within a temperature range of -40°C to 85°C.
- Ensure that the operating environment is within these limits to maintain reliable operation.
Handling Precautions:
- Handle the device with care to avoid static damage.
- Use appropriate ESD protection measures when handling the device.
Storage:
- Store the device in a dry, cool place to prevent moisture damage.
By following these instructions, you can ensure the proper and reliable operation of the HCF4049UBEY in your digital circuit designs.
(For reference only)Inquiry - HCF4049UBEY
