Instructions for Using the MC14093BCPG

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 2.0 V to 6.0 V.
   • Use a stable power supply to avoid fluctuations that can affect performance.

2. Input Levels:

   • For a logic low input, ensure the voltage is below 0.8 V.
   • For a logic high input, ensure the voltage is above 2.0 V.

3. Output Levels:

   • When the output is low, the voltage should be between 0.25 V and 0.5 V.
   • When the output is high, the voltage should be between 2.4 V and 3.0 V.

4. Propagation Delay (t_pd):

   • The typical propagation delay at 5 V and 25°C is 12 ns, with a maximum of 20 ns.
   • This value can vary with different supply voltages and temperatures.

5. Power Dissipation (P_D):

   • The maximum continuous power dissipation is 100 mW.
   • Ensure adequate heat sinking if operating near this limit.

6. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store in a dry environment to prevent moisture damage.

7. Circuit Design:

   • Use decoupling capacitors close to the power pins to filter out noise.
   • Ensure all unused inputs are tied to a defined logic level to prevent floating states.

8. Testing:

   • Test the device under specified conditions to ensure it meets the required performance parameters.
   • Use appropriate test equipment to measure input and output levels accurately.

By following these instructions, you can ensure reliable operation of the MC14093BCPG in your circuit design.