Share:
Specifications
SKU: 828405
LMC6082 Precision CMOS Dual Operational Amplifier; Package: SOIC NARROW; No of Pins: 8; Qty per Container: 2500/Reel
| Parameter | Symbol | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage | VCC | 1.8 | - | 5.5 | V |
| Supply Current (Quiescent) | IQ | - | 20 | - | μA |
| Input Bias Current | IB | - | 2 | - | pA |
| Input Offset Current | IOS | - | 0.3 | - | pA |
| Input Voltage Range | VIN | 0 | - | VCC | V |
| Output Voltage Swing | VOUT | 0.1 | - | VCC - 0.1 | V |
| Slew Rate | SR | - | 0.4 | - | V/μs |
| Gain Bandwidth Product | GBP | - | 1.2 | - | MHz |
| Common Mode Rejection Ratio | CMRR | - | 110 | - | dB |
| Power Supply Rejection Ratio | PSRR | - | 110 | - | dB |
| Operating Temperature Range | TA | -40 | - | 125 | °C |
| Storage Temperature Range | TSTG | -65 | - | 150 | °C |
Instructions for Using LMC6082IMX/NOPB
Supply Voltage:
- Ensure the supply voltage is within the range of 1.8V to 5.5V.
- Use a stable power source to avoid fluctuations that could affect performance.
Input Bias and Offset Current:
- The input bias current is very low (2 pA typical), making the LMC6082 suitable for high-impedance applications.
- Keep the input offset current in mind when designing circuits to minimize errors.
Input Voltage Range:
- The input voltage can range from 0V to the supply voltage (VCC).
- Avoid exceeding these limits to prevent damage to the device.
Output Voltage Swing:
- The output voltage can swing from 0.1V above ground to 0.1V below the supply voltage.
- Ensure the load connected to the output can handle this range.
Slew Rate:
- The slew rate is 0.4 V/μs, which is important for high-frequency applications.
- Design your circuit to accommodate this rate to avoid distortion.
Gain Bandwidth Product:
- The gain bandwidth product is 1.2 MHz, which helps in determining the maximum frequency at which the op-amp can operate with a given gain.
Common Mode Rejection Ratio (CMRR):
- A CMRR of 110 dB indicates excellent rejection of common-mode signals, making the op-amp suitable for differential amplification.
Power Supply Rejection Ratio (PSRR):
- A PSRR of 110 dB means the op-amp is highly insensitive to power supply variations, ensuring stable operation.
Operating and Storage Temperature:
- The operating temperature range is -40°C to 125°C, and the storage temperature range is -65°C to 150°C.
- Ensure the device is used and stored within these limits to maintain reliability.
Handling and Mounting:
- Handle the device with care to avoid static discharge, which can damage the sensitive components.
- Follow proper soldering techniques and ensure good thermal management if the device will be used in high-temperature environments.
By following these parameters and instructions, you can effectively use the LMC6082IMX/NOPB in your electronic designs.
(For reference only)Inquiry - LMC6082IMX/NOPB
