Share:
Specifications
SKU: 832778
8-Bit Bus Switch
| Parameter | Symbol | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage | Vcc | 2.7 | - | 5.5 | V |
| Operating Current | Iop | - | 1.5 | 3 | mA |
| Output Type | - | Open Collector | - | - | |
| Maximum Output Current | Iout | - | - | 20 | mA |
| Response Time (Typical) | tresp | - | 20 | - | ms |
| Release Time (Typical) | trele | - | 10 | - | ms |
| Operating Temperature | Topr | -40 | - | 85 | °C |
| Storage Temperature | Tstg | -40 | - | 125 | °C |
| Magnetic Sensitivity | Bop | 15 | 25 | 40 | mT |
| Magnetic Release Point | Brp | 5 | 15 | 25 | mT |
Instructions for Use:
Power Supply:
- Ensure the supply voltage is within the range of 2.7V to 5.5V.
- Connect the Vcc pin to the positive supply and GND to the ground.
Output Configuration:
- The output is an open collector type, which requires an external pull-up resistor.
- Connect the pull-up resistor between the output pin and the supply voltage (Vcc).
Magnetic Field Application:
- Apply a magnetic field of at least 15 mT to activate the sensor.
- The sensor will release when the magnetic field drops below 5 mT.
Temperature Considerations:
- Operate the device within the temperature range of -40°C to 85°C.
- Store the device within the temperature range of -40°C to 125°C.
Response and Release Times:
- The typical response time is 20 ms.
- The typical release time is 10 ms.
Current Limitation:
- Do not exceed the maximum output current of 20 mA to avoid damage to the device.
Handling and Storage:
- Handle the device with care to avoid static discharge.
- Store the device in a dry environment to prevent moisture damage.
Mounting:
- Ensure proper mounting to avoid mechanical stress on the device.
- Follow the recommended PCB layout guidelines for optimal performance.
Inquiry - FST3345MTC
