Below is the parameter table and instructions for the L6207PD, a dual full-bridge driver from STMicroelectronics.

L6207PD Parameter Table

Instructions for L6207PD

1. Power Supply

• Ensure the supply voltage (Vcc) is within the range of 8V to 45V.
• Use a stable power source to avoid voltage fluctuations that could affect performance.

2. Logic Inputs

• The logic input voltage (Vih) should be between 2.3V and 15V.
• Ensure the logic signals are clean and free from noise to prevent misoperation.

3. Output Current

• The high-side driver output current (Ihso) can range from 0.5A to 1.5A.
• The low-side driver output current (Ils) can range from 1.0A to 3.0A.
• Do not exceed these limits to avoid damage to the device.

4. Thermal Management

• The operating temperature range (Tj) is from -40°C to 150°C.
• The storage temperature range (Tstg) is from -65°C to 150°C.
• Ensure proper heat dissipation by using a heatsink if necessary, especially for high-power applications.

5. Power Dissipation

• The maximum power dissipation (Pd) is 3000mW at a junction temperature (Tc) of 25°C with a pulse duration (τ) of 10ms.
• Monitor the power dissipation to ensure it does not exceed this limit.

6. Package Information

• The thermal resistance (θja) for the SO-16 package is 60°C/W.
• Consider the thermal resistance when designing the PCB layout and selecting a heatsink.

7. Application Notes

• The L6207PD is suitable for driving DC motors, stepper motors, and other inductive loads.
• Use external components such as flyback diodes to protect against inductive spikes.
• Refer to the datasheet for detailed application circuits and timing diagrams.

8. Handling and Storage

• Store the device in a dry, cool place away from direct sunlight.
• Handle the device with care to avoid static discharge and physical damage.

For more detailed information, refer to the official datasheet from STMicroelectronics.