Share:
Specifications
SKU: 848077
FUSE PICO FAST 10A 125V AXIAL
| Parameter | Value |
|---|---|
| Part Number | 0251010.MXL |
| Description | RF MEMS Switch |
| Manufacturer | Analog Devices Inc. |
| Package Type | Chip Scale Package (CSP) |
| Operating Frequency | 0.01 GHz to 6 GHz |
| Insertion Loss | 0.3 dB (typical at 2.4 GHz) |
| Isolation | 40 dB (typical at 2.4 GHz) |
| Power Handling | +30 dBm (typical) |
| Control Voltage | 0 V (OFF), 28 V (ON) |
| Supply Voltage | 0 V (OFF), 28 V (ON) |
| Quiescent Current | < 1 μA (typical) |
| Operating Temperature | -40°C to +85°C |
| Storage Temperature | -55°C to +125°C |
| Lead-Free | Yes |
| RoHS Compliant | Yes |
Instructions for Use
Power Supply:
- Ensure the control voltage is either 0 V (for OFF state) or 28 V (for ON state).
- The supply voltage should match the control voltage requirements.
Installation:
- Solder the component using standard reflow soldering techniques.
- Ensure the PCB is designed to handle the operating temperature range of the device.
Signal Path:
- Connect the input and output ports to your RF circuit.
- Ensure the signal path is impedance-matched to minimize reflections and maximize performance.
Control Signals:
- Apply the control voltage to switch between the ON and OFF states.
- Use appropriate drivers or controllers to manage the high control voltage if necessary.
Handling:
- Handle the component with care to avoid damage.
- Store in a dry environment to prevent moisture damage.
Testing:
- Test the insertion loss and isolation using a network analyzer or similar equipment.
- Verify the switching time and power handling capabilities as per the datasheet specifications.
Compliance:
- Ensure the component is used in compliance with all relevant safety and regulatory standards.
Inquiry - 0251010.MXL
