Instructions for Use:

1. Power Supply:

   • Connect the power supply to the V_CC pin. Ensure the voltage is within the range of 4.5V to 36V.
   • Ground the GND pin.

2. Input Signal:

   • Apply the input signal to the IN pin. The input voltage should be within the range of 0V to V_CC.
   • The frequency of the input signal should be between 10Hz and 100,000Hz.

3. Output Configuration:

   • The output can be configured as either open collector or push-pull.
   • For open collector configuration, connect an external pull-up resistor from the OUT pin to V_CC.
   • For push-pull configuration, the output will drive both high and low states directly.

4. Frequency-to-Voltage Conversion:

   • The LM2907M-8/NOPB converts the frequency of the input signal to a proportional voltage at the OUT pin.
   • The output voltage is typically linear with respect to the input frequency.

5. Thermal Considerations:

   • Ensure proper heat dissipation if operating at higher power levels or temperatures.
   • The maximum power dissipation is 1.1W at 25°C ambient temperature.

6. Operating and Storage Temperatures:

   • The device is rated to operate from -40°C to 125°C.
   • Store the device in a temperature range of -65°C to 150°C.

7. Handling Precautions:

   • Handle the device with care to avoid static damage.
   • Follow standard ESD (Electrostatic Discharge) precautions when handling and soldering the component.

8. Package Information:

   • The LM2907M-8/NOPB is available in an 8-pin DIP (Dual Inline Package) or SOIC (Small Outline Integrated Circuit) package.
   • Ensure the correct orientation during installation to avoid damage.

By following these parameters and instructions, you can ensure optimal performance and reliability of the LM2907M-8/NOPB in your application.