Share:
Specifications
SKU: 862025
MINIATURE POWER RELAY
| Parameter | Description | Value |
|---|---|---|
| Model Number | Model identification | DK2A-24V |
| Type | Device type | Relay Module |
| Input Voltage | Operating voltage range | 24V DC |
| Current Rating | Maximum current per contact | 10A |
| Contact Form | Configuration of contacts | SPDT (Single Pole, Double Throw) |
| Coil Resistance | Resistance of the relay coil | 120Ω |
| Operating Temperature | Range for reliable operation | -40°C to +85°C |
| Storage Temperature | Range for storage without damage | -55°C to +125°C |
| Insulation Resistance | Minimum resistance between contacts and coil | 100MΩ at 500V DC |
| Dielectric Strength | Voltage withstand capability | 1000V AC for 1 minute |
| Mechanical Life | Number of operations without load | 10 million cycles |
| Electrical Life | Number of operations with rated load | 1 million cycles |
| Weight | Approximate weight | 30g |
Instructions:
Installation:
- Ensure the input voltage is 24V DC.
- Connect the relay module to the power supply and control circuit as per the wiring diagram provided in the user manual.
- Secure the relay module in a well-ventilated area to prevent overheating.
Operation:
- Apply the control signal to activate the relay.
- The relay will switch the contacts according to the control signal.
- Monitor the operation to ensure it meets the required specifications.
Maintenance:
- Regularly inspect the relay for signs of wear or damage.
- Clean the contacts if they become dirty or corroded.
- Replace the relay if it fails to operate correctly.
Safety Precautions:
- Do not exceed the maximum current rating of 10A.
- Avoid operating the relay in environments with high humidity or corrosive gases.
- Disconnect the power supply before performing any maintenance or repairs.
Inquiry - DK2A-24V
