Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 4.5V to 20V.
   • Connect a bypass capacitor (0.1μF) between V_CC and GND as close to the device as possible to filter out noise.

2. Input Signals:

   • Input voltages should be within the range of 0V to V_CC.
   • Avoid applying voltages outside this range to prevent damage to the device.

3. Output Loads:

   • The maximum output current per output is 25mA. Do not exceed this limit.
   • For higher current requirements, use external transistors or drivers.

4. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 85°C for optimal performance.
   • Store the device in temperatures ranging from -65°C to 150°C.

5. Propagation Delay:

   • The typical propagation delay time is 20ns, with a maximum of 70ns. Account for this delay in your timing calculations.

6. Quiescent Current:

   • The quiescent current is typically 5μA and can go up to 10μA. This is important for low-power applications.

7. Power Dissipation:

   • The maximum power dissipation is 330mW. Ensure adequate heat dissipation if operating near this limit.

8. Handling Precautions:

   • Handle the device with care to avoid static damage. Use ESD protection when handling.
   • Follow proper soldering techniques to avoid thermal shock and mechanical stress.

9. Mounting and Layout:

   • Place the device on a PCB with proper ground planes and power distribution to minimize noise and improve stability.
   • Keep signal traces short and direct to reduce parasitic effects.