Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 4.5V to 30V.
   • Use appropriate decoupling capacitors (e.g., 100nF and 10μF) close to the power pins to stabilize the supply.

2. Output Current:

   • The continuous output current per channel should not exceed 1.5A.
   • For peak currents up to 5A, ensure the pulse duration is short to avoid overheating.

3. Thermal Management:

   • The device can dissipate up to 2.5W at room temperature (25°C). For higher power dissipation, use a heatsink or ensure adequate airflow.
   • Monitor the junction temperature to stay below 125°C during operation.

4. Input Logic:

   • The logic input voltage range is from 0V to 5V. Ensure the input signals are within this range to avoid damage.

5. Storage and Handling:

   • Store the device in a temperature range of -55°C to 150°C.
   • Handle with care to avoid static discharge, which can damage the device.

6. Mounting:

   • Solder the device to the PCB using standard soldering techniques. Ensure good thermal contact with the PCB to facilitate heat dissipation.

7. Testing:

   • Before final assembly, test the device under typical operating conditions to ensure it meets the specified parameters.

8. Safety:

   • Always follow safety guidelines when handling and testing high-power devices to prevent injury or damage.